Text

ĐỒ ÁN

Tổng hợp các đồ án mẫu dành cho sinh viên chuyên ngành xây dựng.

DRAWING LIBRARY

Bộ sưu tập các bản vẽ mẫu Autocad,Revit,Max các biệt thự,chung cư và các công trình dân dụng khác.

DISSCUS

Cùng nhau thảo luận những chủ đề liên quan đến xây dựng

GALLERY

Kho Sách Nói Audio Book,Hình ảnh,Video dùng cho giải trí

YÊU CẦU TÀI LIỆU

Để lại yêu cầu về tài liệu mà bạn đang cần.Nếu được,tài liệu sẽ gửi đến bạn sớm nhất có thể.

NOTE Đóng lại

Thứ Bảy, 19 tháng 11, 2011

Bản vẽ thiết kế cây xăng


Các bạn tham khảo nhé.


*Ấn Skip Ad để download.

InteriCAD-Phần mềm thiết kế nội thất chuyên nghiệp


Intricad là phần mềm chuyên dụng trong thiết kế nội thất.. Chỉ cần 1 giờ để thể hiện ý tưởng thiết kế, kết quả mà bạn nhận được là: Bản vẽ 2D, bản vẽ chi tiết, bản vẽ phác thảo, những bức ảnh thực, những thước phim chuyển động …Trong thiết kế nội thất, những giải pháp bạn cần từ AutoCAD,3ds Max, 3D Home Architect…thì InteriCAD đều có thể mang lại cho bạn !
Dễ dàng hơn – nhanh chóng hơn – hiệu quả hơn là ưu việt của InteriCad

Một vài tính năng cơ bản của phần mềm intericad:

- Intericad 2D Design:• Có thể đưa 1 bản scan mặt bằng (file ảnh jpg) vào phần mềm. Tỷ lệ bản vẽ được điều chỉnh phù hợp với công trình thực tế qua một vài thao tác đơn giản.
• Chuyển từ 2D -> 3D với mức độ chi tiết cao. Có thể ngay lập tức Render thành ảnh mà không cần thêm một bước chỉnh sửa nào.


- Intericad 3D Modeling:
• Bổ sung thêm các chức năng thiết kế 3D cho AutoCAD hỗ trợ tương đối hữu ích các chi tiết kiến trúc cơ bản: Trần, sàn, cốt , ban công, lan can, cửa sổ, cửa đi...
. Thiết kế hiệu quả các chi tiết phức tạp có tính thẩm mỹ cao
- Intericad VR (Virtual Reality):
• Render các mô hình 3D có thể thực hiện ngay trong AutoCAD, và để nâng cao chất lượng, có thể sử dụng module VR (Virtual Reality).
• Hỗ trợ render băng mô hình Radiosity (mô hình ánh sáng hiện đại tính tóan theo quan điểm năng lượng của ngồn sáng) cho hiệu quả cao và rất gần với thực tế.
• Hỗ trợ render thành hình ảnh toàn cảnh (panorama), hình ảnh lập thể (stereo) và các đoạn film animation (tạo chuyển động bằng cách ghi lại các chuyển động của camera dưới sự tác động của người dùng)


Đặc biệt có thể thay đổi thuộc tính vật liệu nhanh chóng cho kết quả tức thì chỉ với động tác kéo thả. Ngoài 9000 mẫu đồ nội thất sẵn có (cứ 1-2 tháng lại được cập nhật), bạn cũng có thể add đồ đạc do bạn chọn lựa vào thư viện. Nhờ đó dễ dàng show sản phẩm trực tiếp cho khách hàng. Khả năng này sẽ hỗ trợ việc kinh doanh của công ty bạn hiệu quả hơn đối với việc đáp ứng nhu cầu khách hàng.

- Thiết kế ngoại thất InteriCAD hỗ trợ hệ thống công cụ giúp người dùng thiết kế và hoàn thành phối cảnh trong thời gian nhanh nhất. .

Dưới đây là một vài hình ảnh sử dụng InteriCAD để thiết kế












 

 

Nguồn Th3D.blogspot.com

Thứ Sáu, 18 tháng 11, 2011

[Tips for Revit]Tạo mái ngói trong Revit




tao mai ngoi vn
Nguồn TH3D.blogspot.com

Trọn bộ giáo trình Kỹ thuật thi công




Đây là bộ Thi công của Lê Kiều :download
Đây là bộ thi công của Bộ xây dựng xb:download
Construction methodes and Management( Nunnally 7th edition) cuốn này good: Download
Đây là bài giảng của cô Đỗ Thị xuân Lan trường mình: download
Còn đây là bài tập của mình downlad
Chúc các  bạn học tốt

Thứ Năm, 17 tháng 11, 2011

Preparing for Engineering Job Interview


How to get a Engineering Career as your wish? Keep in mind that a well preparation leads to your success. Hereafter are most important tips for Engineering Jobs Interview.


DON’T BE ON TIME – BE EARLY


It is important you arrive at the interview 20-30 minutes early. Obviously, being late sends a negative message about you to the interviewer. Many interviewers don’t meet with candidates who arrive late. Plan ahead. Investigate traffic patterns relative to the time of your job interview. Don’t expect the interviewer will be sensitive to delays caused by traffic congestion or an unexpected traffic accident. They expect you will allow for those eventualities, just like they do.


DRESS & LOOK PROFESSIONAL


Women: A skirt, dress or dress-suit or pant-suit are the most appropriate for the female candidate. Make sure your clothes are neat, clean and well pressed and make sense. Avoid controversial garb, anything too revealing or too trendy. You want to look professional, not like you are there to get a date or express a fashion statement.

Men: A dress suit, shirt and tie is the most appropriate clothing for the male candidate. Make sure your clothes are neat, clean and well pressed. Avoid flashy colors, jeans, T-shirts or tennis shoes. Wear your hair neat (including facial hair), clean and well groomed.

Oh yeah, and please cover tattoos and body piercings. While your private friends may enjoy the current fad of body art, most likely, a new employer isn’t impressed, in fact, may look upon those expressions as somewhat immature – regardless of how you may feel about them. If such corporate attitudes are uncomfortable for you, find another prospective employer who is more open to such un-requested expressions of personality. Otherwise, be professional, dress professional, behave professionally.


PREPARE


Have a pen, notepad and extra copy of your resume and references with you. Make notes of questions you want to ask that relate to the job and company. Put those items in a place that will be easy for you to get to when you need them in the interview. If you currently use a daily/weekly planner, bring that with you too. You should try to arrive at your interview well rested, with a clear mind and a plan for presenting your credentials and supporting materials like references.

GREET JOB INTERVIEWER ENTHUSIASTICALLY

Smile, be friendly, not nervous, offer a solid handshake and say something friendly, like: “Good morning, pleasure to meet you, and thank you for the opportunity to visit with you today.” Show your enthusiasm about the opportunity to work for their company. Remember, they are interviewing you for a job that requires specific skills and genuine enthusiasm — if you don’t express that at the interview, they many not be convinced you have the stamina required for the job.


DON’T HIGHLIGHT NEGATIVES


For the job interviewer, it is all about filling the job with the right person. Believe me, most job interviewers don’t want to hear about your antique tin can collection, or how you landed that elk last year on your vacation. An interviewer wants your undivided attention on their job needs. Your personal habits distract from that focus. Such personal comments may include topics like: smoking, chewing gum, nervous finger or feet movement, tapping a pencil or a fork, humming, whistling, stretching, cleaning finger nails, clearing your throat, excessive “ums” in conversation, or focusing too much time on unrelated topics. Don’t make negative remarks about your past or present employers or workmates. Negative remarks will not help your cause, and will seem as though you are blaming others for poor results.

RESEARCH THE COMPANY THOROUGHLY

Learn as much as you can about the company and the duties of the job position which interests you, like income range and associated benefits. Family and friends are sometimes sources of information about the company you seek for employment. But don’t rely on hearsay, try to talk to someone in the company about the requirement and expectations of the job you seek. And utilize more than one source of comments about the company you are considering. Any positive things you learn about the company, make sure you mention them to the interviewer as a way to express your long term interest in the job you seek. Be prepared to answer questions about why you want to work for their company, offering sensible reasons that are practical in results.

PREPARE TO ASK QUESTIONS

You don’t want to confuse the interviewer with too many questions. Remember, they are interviewing you, so be prepared to answer all their questions smartly. But challenge the interviewer with some of your own questions – determine those questions before you arrive to the job interview. Keep good eye contact when you ask your questions. Don’t get into lengthy discussions. The idea is to engage the interviewer, to show them you can take charge when required and get the information you need. You should strive to create a list of questions that go to the heart of the job you seek.


KEEP A GOOD ATTITUDE


Be confident and knowledgeable and you will express a good attitude. But don’t seem over confident in your abilities. Remain relaxed, answer questions sincerely. Be interested in the job and the company. Lighten up some and use a little humor! Your job interviewer should be made to feel you really want the job and their company. Show serious interest so that you will be considered a serious candidate. Do not mention offers of interviews with other companies, unless asked.


SPECIFIC QUESTIONS TO EXPECT


When answering questions that have a pre-determined answer, remember to offer a straight forward and immediate answer, and keep it simple. Avoid yes/no answers, unless you are offering an example to illustrate your answer. In fact, as much as possible, try and offer your key answers in a format of : Strategy-then-example. In that sense, if you were to discuss aspects of how to build a team of your workmates, you could answer with a short comment about your overall strategy of how to build a team, then follow that up with a quick real-time example of how you recently utilized that strategy and the results you got. Something like – “I build a team by making sure everyone involved understands our mutual goals, the timing, and their influence on those goals. When I did that last Spring, as we were introducing a new product, the goal was to sell more product by training team members to up-sell the new product to existing customers – we increased sales over 20-percent in one month.”


PREPARE TO ASK QUESTIONS


You don’t want to confuse the interviewer with too many questions. Remember, they are interviewing you, so be prepared to answer all their questions smartly. But challenge the interviewer with some of your own questions – determine those questions before you arrive to the job interview. Keep good eye contact when you ask your questions. Don’t get into lengthy discussions. The idea is to engage the interviewer, to show them you can take charge when required and get the information you need. You should strive to create a list of questions that go to the heart of the job you seek.

Source: http://civilengineersite.com

Concrete Beam Repairing – A Case Study

 

 

Overview of the problem

Honeycomb is found at the bottom of the beam after shuttering (formwork removing). Reinforced bars are exposed. Aggregates are exposed without cement mortar.
Possible causes
The reason may be caused by one of or all of bellows:
a. Lack of vibration during concreting
b. The concrete is too dry to vibration
Repairs of damages:
The damages should be repaired with materials that:
> high strength
> non-shrink
> good bonding to the concrete of the structure.

Steps of repairing

The repairing work should follow strictly the steps of surface preparation and repairing application as follows:
A. SURFACE PREPARATION
Remove loose or honeycombed concrete mechanically. Area to be repaired must be clean, sound and free of contaminants. Where reinforcing steel (with or without active corrosion) is encountered, the following procedures will be used: sandblast or wire brush reinforcing steel to remove all contaminants and rust. If half of the diameter of the rebar is exposed, chip out behind the reinforcing steel for providing at least 10 mm clearance between steel and surrounding concrete if a hand applied mortar or grouting material (without aggregate) is used.
At edge locations, provide right angle cuts to the concrete surface to avoid feather edging of repair material, i.e. saw-cut to 10mm depth, impact breakers.
Repair configuration should be kept as simple as possible, preferably straight edges and corners. Check concrete surface is clean and insure that surface is free from additional loose aggregates and that additional honeycombing is not present.
B. REPAIRING SYSTEMS
There are 2 methods: one for thin repairing with thickness of 5-6 cm and one for thick repairing with thickness of 10-15cm as follows:
1. MANUALLY APPLIED REPAIR SYSTEM (FOR SMALL HONEYCOMBING)
 Mix Sika Monotop 732 with clean water as per instructions given in the technical data sheet. Apply the bonding slurry with a stiff paint brush on to the substrate and the exposed steel reinforcements.
 Mix Sika Monotop R repair mortars as per instructions given in the technical data sheet. Apply Sika MonoTop R onto the still wet bonding bridge by trowel in a layer thickness of not more than 30 m. Then apply the second layers after 12 hours and not later than 3 days. Cure for at least 3 days by covering with wet hessian or approved curing compound.
2. FORM AND CAST-IN-PLACE (FOR LARGER HONEYCOMBING)
Mix Sikadur 732 as per instructions given in the technical data sheets. Within its potlife, Sikadur 732 shall be applied by brush onto concrete and steel exposed surfaces.
Form-up the area to be repaired with suitable formwork properly fixed to the concrete substrate and sealed with sealant. Drill the concrete from the top of the beam for grouting. Vent holes could be provided for making sure that the formwork will be properly filled up with repair material. Mix SikaGrout 214-11 HS in accordance with the technical data sheet. Within the open time of Sikadur 732 bonding agent, pour the grouting material in place and tamp formwork slightly with a hammer. During pouring process, the vent holes are capped one after another when steady flow is evident. Leave the formwork in place for at least 3 days and cured properly repaired area with wet hessian or approved curing compound.

Source: http://civilengineersite.com

Twitter Delicious Facebook Digg Stumbleupon Favorites More